Hi People, New to the forum and found that you guys know about this Phono Pre amp. There is so much information on the web that it gets confusing, so my question is: Want to replace the coupling caps, but many boards I see on the internet are reproductions or do not match my 834p. Here is a picture of my unit and want to know if I'm getting the coupling caps correct, highlighted in red in the picture attached, i e., caps: C7 and C107 (1uf) and C1 and C101 (.15uf) Another doubt: I do not have the .15uf for C1 and C101, but May I use a .22uf? Any problems if I install the .22uf? Both pairs of caps are Mundorf Silver/Gold. Thanks in advance!!!!