AudioNote copper foil capacitors

penance

Arrogant Cock
Joined
Jun 30, 2003
Messages
6,004
Reaction score
2
Location
Bristol - armpit of the west.
I have 2 values of AN copper foil in oil capacitors for sale. Completely non-magnetic and suitable for coupling duties.
These have an external copper case so care is needed when fitting to ensure the case does not short any connections. Pure silver lead outs on both values.

These have a full rich sound to my ears with a hint of almost vinatge valve, well thats how i thought of them. I have now changed over to Mcaps and will no doubt change those aswell at some point.
They have been in my Cornet phono stage for 4 weeks and so have had a good run in.

0.047uF - 630Volt, Lead outs have been trimmed to around 3.5CM and have PTFE sleeve.
2 of above value - £10 each ono (rrp £18.21)

0.001uF - 630Volt, These were fitted upright on PCB and so one lead is around 5CM long with the other being around 1CM long.
2 of above value - £5 each to reflect short lead (rrp £13.51)

£20 + postage if all 4 purchased.
I would be interested in a swap/haggle for some decent resistors (caddock/vishay etc), looking for 12 x 220R 1watt and 4 x 10K 1watt.

Pictures on request by email, cant be bothered to upload to my webspace;)
 
thanks. I'll give this a pass - given where I'm at, there are other paths I should be following just now.

but again, thanks for the 'educational' pointer, and have a free bump from me
 

Latest posts

Back
Top