Bloody Neutrik connectors !

Discussion in 'Hi-Fi and General Audio' started by voodoo, Jun 22, 2003.

  1. voodoo

    voodoo OdD

    Joined:
    Jun 20, 2003
    Messages:
    983
    Likes Received:
    0
    Location:
    Utopolis
    I'm setting up a DJ booth for a friend and everything seems fine but I have no sound coming out of the speakers (not so fine then !). I reckon it's down to the daft Neutrik connections I'm having to use.

    The speakers are single wired into the plugs and I have the positive going to "1+" and the Neg to "1-".

    Seems fairly logical to me but no output.

    Any ideas ?
     
    voodoo, Jun 22, 2003
    #1
  2. voodoo

    zanash

    Joined:
    Jun 20, 2003
    Messages:
    3,826
    Likes Received:
    2
    Location:
    Notts.
    I've these beasties on the back of my 707 powe amp. I have to say that they are normally very good and I believe they self clean as you twist and they click into place.
    You have twisted and heard the click ?
    Alternatively swap the connections positive to +2 and negative to -2. Another solution would be to connect +1 to +2 and -1 to -2, this will cover both options.

    If this doesn't work check with a continuety meter the cable for breaks and or wrong connections.

    Otherwise the problem may lie else where.
     
    zanash, Jun 22, 2003
    #2
  3. voodoo

    voodoo OdD

    Joined:
    Jun 20, 2003
    Messages:
    983
    Likes Received:
    0
    Location:
    Utopolis
    Cheers Zanash :) !
     
    voodoo, Jun 22, 2003
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
Loading...