Dante Protocol

Discussion in 'DIY Discussion' started by frankward94, Sep 30, 2019.

  1. frankward94

    frankward94

    Joined:
    Sep 30, 2019
    Messages:
    1
    Likes Received:
    0
    Hello so I'm building a Dante ecosystem for my church. I have the Yamaha TF3, and I have the Yamaha TIO1608-D. I'm having a huge problem with my tio1603-D. It recently stopped connecting with my tf3 console when I introduced two Cisco SG350-10 managed switches and updated my TF3 to its most current Firmware. Its sync LED stays amber and the input/output LED is red (muted) I have to correct static IP address set through Dante controller. but it won't show up on my TF3. so my best guess is that incompatibility with firmware is the issue.

    All though when I'm connected to the TIO1608-D directly, R-remote does not detect the device. how am I supposed to update the firmware? I have to current firmware downloaded from Yamaha.

    Can anyone help me with this issue?
     
    frankward94, Sep 30, 2019
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Loading...