Hi All this is my first post on here today so be nice:) I have a dual cs505-2 reported fault only one speed. Ordered a belt kit. Fitted it( new drive belt and 2 x pitch belts ) Cleaned it up, But still i don't alway get 45rpm The belt is going down and seems to sit half on and off on the 45rpm. 1 in 10 times it will go on correctly I have polished the motor spindle, removed and cleaned oiled the white plastic arm belt mover My thinking is to remove the motor and if possible to fit the brass motor pulley up maybe 1-2 mm higher I don't normally do to much hifi stuff , just stick to Guitar amps, but it was quiet so i thought why not do this turntable:( many thanks JB
