Goldring Lenco (or Leak Delta) turntable

Wanted: Discussion in 'Classified Adverts' started by harrygrey382, Feb 11, 2007.

  1. harrygrey382

    harrygrey382

    Joined:
    Jun 16, 2006
    Messages:
    164
    Likes Received:
    0
    Location:
    Bristol/West Sussex
    If anyone has a spare, semi complete Goldring Lenco GL75 (as in heavy platter), or similar - Leak Delta turntable I'd love one.
    I'm looking for one to start a project, so it doesn't have to be totally complete, or in mint conidition.
    Preferably nearish Bristol or in Hampshire/West sussex.
    Will pay up to £40 for a really good one, but hoping for less!
    Thanks
     
    harrygrey382, Feb 11, 2007
    #1
  2. harrygrey382

    BlueMax

    Joined:
    Aug 17, 2003
    Messages:
    878
    Likes Received:
    0
    Location:
    South Coast of UK
    I have a Goldring GL75P is excellent un-tarnished condition. Has been carefully stored away for many years. Pulley, arm pivots, knife-edge bearings, etc are all excellent as is evident shown from sensitivity when bias adjustment is made using an appropriate set up LP.

    Also have few accessories such as strobe, cleaning arm. Was planning to solder in a modern interconnect and plugs but did not get around to it. Fitted with Shure M95HE Hyper Elliptical cartridge. Also has a little used Shure M55EM in box.

    Cartridges alone worth much more than £40. So PM me with a realistic offer.

    Located in Goring, West Sussex.
     
    BlueMax, Jun 15, 2007
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.