Mission 773e (Light Cherry)

SOLD: Mission 773e (Light Cherry)

SOLD

Mission 773e in Light Cherry wood finish.

Complete with box, grilles, spikes, manual.

Nearly 4 years old (so well run in ).

Happy to demo at technobear towers or locally (Somerset).

Buyer collects.

£150 ono.

From Mission:
PRODUCT INFORMATION GUIDE
Mission 773e Loudspeaker
Construction
Enclosure: 15mm high density particle board.
Veneer: Real wood veneer supplied from sustainable sources.
Baffle: High grade profiled 38mm MDF.
Ports: Anti-turbulence port tube.
Grille: Acoustically transparent.
Damping: Fire-retardant polyurethane foam.

Electrical
L.F. Unit Twin 130mm (5¼") Aerogel membrane bass/mid units.
H.F. Unit 25mm (1") ferrofluid-cooled, viscous-laminated fabric dome with neodymium magnet.
Cross-Over network:
L.F Unit Phase corrected 1st order.
H.F Unit 2nd order.
Terminals Multi-way, biwirable binding posts.

Specifications
Enclosure Type 2-Way Reflex Loaded, floorstanding
Nominal Impedance 8 Ohms compatible
Frequency Response ±3dB 50Hz-20kHz
Sensitivity SPL/m/2.83V 88 dB
Cross-Over Frequency 3 kHz
Effective Volume 22 Litres
Recommended amplifier power 25 - 130W
Cabinet Dimensions (H x W x D) 850 x 172 x 267 (mm) 33.5 x 6.8 x 10.6 (inches)

Finishes Graphite black, Rosewood & Cherry real wood veneers

Features Benefits
Ultra rigid particle board cabinet - Significantly reduced cabinet coloration.
Profiled front baffle edges - Reduced edge diffraction giving outstanding stereo imaging.
38mm MDF front baffle - Strong, stable platform for drive unit mounting.
Integral adjustable base spikes - Effective cabinet de-coupling and improved stability.
Aerogel membrane mid/bass units - Low mass for excellent detail resolution, rigid for increased dynamics.
Twin bass drivers - Provides large bass dynamics with clarity and precise control.
Phase correction plug - Better off-axis performance, smoother frequency response, reduced cone mass and removal of dust-cap resonance.
Leaf-sprung HF isolation system (DIS) - Tweeter unit is isolated from sonically degrading baffle vibrations.
Viscous-laminated fabric dome HF unit - Highly refined, ultra-low distortion high frequency unit.
Simple cross-over network - Minimised signal path between amplifier and speaker resulting in increased detail resolution and an easy amplifier load.
Setting Up
• RUN IN for at least 24 hours before serious listening.
• Position within 10cm – 30cm of rear wall.
• Use good quality speaker cable.

So now you know

Chris

 

These have now been sold.

Chris