nsx 10000 crossover points

Discussion in 'DIY Discussion' started by stewartwen, Dec 18, 2006.

  1. stewartwen

    stewartwen

    Joined:
    Aug 16, 2006
    Messages:
    18
    Likes Received:
    0
    Hithere does any one know the crossover points on a Yamaha NSX 10000. I have tried the usual internet searches but to no avail. There seems to be no tech specs for these l/s.
    This is important for me as I intend to drive them actively.
    Regards
    Stewart
     
    stewartwen, Dec 18, 2006
    #1
  2. stewartwen

    joel Shaman of Signals

    Joined:
    Jun 21, 2003
    Messages:
    1,650
    Likes Received:
    0
    sorry to say that I don't have the info you need, although I would guess they're not too far off the NS2000 points.
    Why do you want to go to active xovers?
     
    joel, Dec 18, 2006
    #2
  3. stewartwen

    Tenson Moderator

    Joined:
    Nov 12, 2003
    Messages:
    5,947
    Likes Received:
    1
    Location:
    Kent, UK
    If I were you, I would look inside and see what components are used. You will need to do this anyway to see if it is suitable for a simple change-over to an active Xover. If it has notch filters, ladder delay networks and other things going on then it may not be suitable to just stick a standard active Xover on it.
     
    Tenson, Dec 18, 2006
    #3
  4. stewartwen

    wwhey

    Joined:
    Dec 25, 2008
    Messages:
    1
    Likes Received:
    0
    wwhey, Dec 25, 2008
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
There are no similar threads yet.
Loading...