Ultimate diffraction control

Discussion in 'Trade Adverts and Discussion' started by jimdgoulding, Jul 26, 2009.

  1. jimdgoulding

    jimdgoulding Manufacturer

    Joined:
    Jul 26, 2009
    Messages:
    53
    Likes Received:
    0
    "The output should equal the input". "What goes in should be what comes out".

    Legendary speaker designer John Dunlavy said the former, don't know who said the latter. But, what goes in originates at the microphone. What was once acoustical becomes electrical to become acoustical again once it departs our loudspeakers in the form of sound waveforms. Most everyone knows that how sound waveforms interact with our listening environment will have an effect on what we hear. What most people don't know, however, is that waveforms are interacting with the first thing they see at their point of departure. In the case of conventional box speakers, that would be the hard surface of our speaker baffles and edges:

    http://www.silcom.com/~aludwig/images/diffdem.gif

    Our baffles and enclosure right angles or near right angles are creating a second wave of the information just having arrived only it is later in time and out of phase with the original event. This causes a smearing to the output. It is also responsible for a measurable rise in frequency response in the lower bandpass of tweeters. It is the longer waveforms, those produced by larger drivers, that benefit from room treatments as they are spilling around our enclosures but the shorter ones are being diffracted- the proper name for this incident- as described. A 2000Hz waveform is 18cm or 7", for example. Unfortunate physics but fixable. I make a product for that:

    http://www.diffractionbegone.com/newblankcontact.html

    Short and spreading waveforms "see" the organic wool instead and are absorbed. What you get is more pristine or simply correct information delivered to the listening position. If I've articulated this well enough you can imagine the benefit to your senses and intelligibility where you sit and listen. It is something I would like for you to hear yourself.

    I custom fit to an individual speaker or customer's specification and offer with a 30 day trial period. You'll find me a very responsive person to deal with and I think you will be amazed at how much better your system can make music sound real without diffraction summing in (and with the return on your investment, I might even be your new best friend).

    Thank you.

    Jim Goulding
     
    Last edited by a moderator: Jul 26, 2009
    jimdgoulding, Jul 26, 2009
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.