bypass 70v/100v transformer on eaw vr21 speakers

Discussion in 'DIY Discussion' started by ryan, Dec 8, 2020.

  1. ryan

    ryan

    Joined:
    Dec 8, 2020
    Messages:
    1
    Likes Received:
    0
    i bought 6 jbl control 28 commercial speakers/i found utube video how to bypass 70v transformer to use speakers on 8 ohm home stereo/that worked /on my eaw vr21 i need help to bypass transformer/also i seen post they might have to be rewired due to wrong wire for home use/is this true/any feedback would be helpful/i picked all 8 up for 150.00
     
    ryan, Dec 8, 2020
    #1
  2. ryan

    Sergeauckland

    Joined:
    May 31, 2012
    Messages:
    296
    Likes Received:
    41
    Location:
    Suffolk
    I don't understand what 'wrong' wire for home use means. Wire is wire. If you open up the boxes and remove the transformer, you then connect the cables that went to the transformer to the rear terminals. Just make sure you keep them phased correctly, with the same colours going to the same terminals on all 8 units.

    S.
     
    Sergeauckland, Dec 8, 2020
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Singing transformer

  2. CD Transformer problem?

  3. Why the isolation transformer will getting hum sometime

  4. 100v to 240v conversion

  5. For Sale: Thule PR350B AV processor (with 5.1 bypass)

  6. How to bypass a stereo potentiometer

Loading...