English Valve Amplifiers

Joined
Sep 25, 2006
Messages
505
Reaction score
0
Location
Hastings
English Valve amplifiers, anounce the first in a line of Valve based audio equipment. Starting off with:

Proteus
20w Valve intergrated amplifier. Stainless Steel Chasis using KT88 power valves.

20 Watts RMS into 10 ohms continuous
Speaker impedance nominally 8 ohms
Frequency response 3Hz to 50KHz
Sensitivity Line 450Mv into 100K for 20 Watts
Sensitivity Disc 1.7Mv into 50K for 20 Watts
Hum and noise 1.5Mv at full volume level
Power consumption 250 Watts
Switched IEC socket maximum rating 100 Watts
609 mm wide, 305 mm deep, 230 mm high
Weight 33 Kgm

Previewed at the September Heathrow Show

For a dem contact Paul

[email protected]
 
Have a listen. You might be supprised.

Being a Dealer and previously part of an established highend dealer, I have put it against lots of othe amps at a higher prices.
 
If it sounds as awsome as it looks it'll be a class act. Unfortunately way out of any next amp budget for me:(
 
Back
Top