Garrard 401 Plinth cut for Rega etc.

[mikegreenwood]

Garrard 401 plinth, 36.mm motorboard 36.mm baseboard. Heavy brass machined isolation cones. Cut with a 50mm hole in the arm position and suppled with a spacer to suit the Rega. Gives a good amount of arm adjustment. Finished in a textured maroon, picture's on request. This is a very stable and solid plinth for the 401 and weighs around 6.Kilo's. £100 plus postage or pick up welcome. N/E area.

 

[mikegreenwood]

Looks like Ebay then.>>>>>>