Musical fidelity X-PSU V3 Repair advice

Discussion in 'DIY Discussion' started by Silver Surfer, Jan 18, 2017.

  1. Silver Surfer

    Silver Surfer

    Joined:
    Apr 10, 2008
    Messages:
    9
    Likes Received:
    0
    Location:
    Kent
    I have the above and it failed on me a few months back, sent it back to MF via a good friend and they were not able to repair it. So I am stuffed ! Contacted Mike at Rock Grotto and they can only do the repair / mod so X2 devices power off it, as apposed to X4. Difficult to do seeing as I have X4 other V3 components in the mix and was thinking about adding another buffer.

    Any suggestions or ideas would be appreciated. Or if anyone has or knows anyone, who may have one for sale please let me know.

    Thanks
     
    Silver Surfer, Jan 18, 2017
    #1
    1. Advertisements

  2. Silver Surfer

    michael@arcadia

    Joined:
    Feb 12, 2007
    Messages:
    15
    Likes Received:
    0
    I am surprised that MF could not mend this. Are you sure that it got to Wembley (factory).
    These are simple enough things. Not much to go wrong.
    If you can't replace it, then you could source new individual power supplies, or better still build one for all. You will need to find out the required voltages for each component.
     
    michael@arcadia, Feb 6, 2017
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.