Problem with Otari Mx5050

Discussion in 'Audio Equipment' started by Jeff Laurence, Nov 5, 2017.

  1. Jeff Laurence

    Jeff Laurence

    Joined:
    Nov 5, 2017
    Messages:
    2
    Likes Received:
    0
    When I plug the output from my McIntosh mx113 to the input of my Otari one channel kills the preamps
    output, -- it's like the Otari's input is grounding the signal. Previously, the Otari worked flawlessly. Loose
    wire -- or am I missing something?
     
    Jeff Laurence, Nov 5, 2017
    #1
    1. Advertisements

  2. Jeff Laurence

    Jeff Laurence

    Joined:
    Nov 5, 2017
    Messages:
    2
    Likes Received:
    0
    Turns out 1 of the brand new XLR connectors I bought was mis-wired. Problem solved.
     
    Jeff Laurence, Nov 8, 2017
    #2
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.