Right channel not working

Discussion in 'DIY Discussion' started by gaust, Nov 16, 2006.

  1. gaust

    gaust

    Joined:
    Feb 8, 2005
    Messages:
    14
    Likes Received:
    0
    Location:
    Newcastle, UK
    Hello,
    I've just picked up a Rotel RA-931 amp, however the right channel appears to be completely dead. Any ideas of potential solutions to this - my thought at the moment (for a simple / fixable thing that might be wrong) is that a fuse may have gone. There is a headphone socket so I guess that I could check whether both channels of that are working. Any ideas or suggestions would be greatly appreciated,
    Cheers,
    Jon
     
    gaust, Nov 16, 2006
    #1
  2. gaust

    gaust

    Joined:
    Feb 8, 2005
    Messages:
    14
    Likes Received:
    0
    Location:
    Newcastle, UK
    Quick update,
    I've taken the lid off and sure enough one of the fuses close to the right channel output has blown. I've taken it out its a glass fuse. On the PCB it says F602 T4A (I presume this is the type of fuse to replace it with). On the fuse iteslf it says T4L 250V. Any ideas where I should be looking for these (will Maplin stock them?)
    Thanks again for any help,
    Jon
     
    gaust, Nov 16, 2006
    #2
  3. gaust

    zanash

    Joined:
    Jun 20, 2003
    Messages:
    3,826
    Likes Received:
    2
    Location:
    Notts.
    yes .....
     
    zanash, Nov 17, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. On wobbly valve bases, and being in the right place at the right time

Loading...