Show us Your Kit!

I don't know if I've ever posted my set up here but there have been a few changes recently anyway, so I might as well list it now:

LP12/Syrinx PU3/Ortofon Kontrapunkt 'b'
Marantz 4100 OSE dvd player
TagMclaren DAC20
Naim 32.5/hicap/160
Nakamichi AV10
Linn Kabers
Linn Centrik centre speaker
Mordant Short MS20i as rear speakers
Speaker cables are NACA5, FFRC and Gale
Interconnects from Chord and QED, plus a very nice set of Zanash's L'argent Plus with Eichmanns that I made myself.

Plus a Target tt wallshelf and seriously ugly Target rack.

All the best,

Goomer.
 
Last edited by a moderator:
Proceed CDP
Sony DVP-S9000ES
Sony KV27FS16
Electrocompaniet ECI 3
Audio Physic Tempo II
Energy Loudspeakers MicroStar 12.1 Sub
Analysis Plus Oval Nine speaker cable
Apogee balanced interconnects (Proceed)
Acrotec 6N-A2010 interconnects (Sony)
300+ CDs, DVDs and SACDs.
 
Last edited by a moderator:
Marantz CD-17 MKII KI ==> belden 83803s
Nordost Blue heavens
NAD C370 ==> modded IEC outlet/belden 83803s
Nordost superflatline customs
Dynaudio Acoustics BM-6P ==> target stands/atabyte-filled

Kelly
 
Originally posted by senna993
Proceed CDP
Sony DVP-S9000ES
Sony KV27FS16
Electrocompaniet ECI 3
Audio Physic Tempo II
Energy Loudspeakers MicroStar 12.1 Sub
Analysis Plus Oval Nine speaker cable
Apogee balanced interconnects (Proceed)
Acrotec 6N-A2010 interconnects (Sony)
300+ CDs, DVDs and SACDs.
Click to expand...

Ooh another Audio Physic ist

:respect:

I'm not alone any more :D

About time too !!!!
 
Quad II-Forties amps

QC 24 pre amp

Quad FM4

B&W 804's

B&W CDM 1NT

Linn LP12

Creek OBH 21 Amp

IsoTek power supply

Grado SR60 headphones

Leads,Van den Hul Chord Kimber

RA Power Leads

Naim 5 CD Player

Naim 112 pre amp

Sony SACDXB790

Quad 99 and 909 power amps

Also freeview box for digital radio:cool:
 
My current rig:

Rega P9/Sumico Blue Point Special/Tom Evans Microgroove Plus

Marantz CD17 MkII KI Sig

Creek T43/Ron Smith twig

AVI S2000M

B&W Nautilus 802

Aavik supports

Townshend Isolda/ DCT/ interconnects/speaker cable

Nordost power cables

All groovin' like a bastid...........:)
 
Cheers, Ian. It's the directional cables that make all the difference:D
Nah seriously, the P9's a belter. And the recent upgrade from a Creek OBH-8SE/Reson Reca to the Tom Evans/Sumiko was a major eye opener. I'd pimp my g/f for The Groove, but sweet as she is, I doubt it would raise the necessary two grand. Way too much moola.
Havin' said that, what's a blowjob from a blonde 23-year old Russian chick worth? Muhahahaha!!!!!!!!!
 
New to this forum also... I know this akin to comparing d**k sizes but here's my rig for the record:


Arcam CD73T

Arcam A85

Arcam T61

Monitor Audio Gold Reference 20's

Ecosse interconnects/QED speaker cabling(bi-wired)

...currently weighing up the power cabling myth with a pair of borrowed TCI Super Constrictors (and so far NOT convinced folks...)
 
Just walked into the only HiFi-shop in my town this afternoon,
and spotted a mint s/h Rotel RT935ax tuner.

So, I decided to take it home, and place it on my spare bottom shelve.
It sounds remarkebly good I must say! :)
(not as edgy/compressed as the Denon and Sony tuners I had some years ago)

well, I thought I might as well update my systempics then...

Sonneteer Campion, Naim CDX, Rotel RT935ax,
on Quadraspire system support.

hifi_set3.JPG


system-pic-3.JPG


hifi_set2.JPG


regards,
Alco
 
Last edited by a moderator:
Ok, I've got an up to date (for now!) pic:

s300hifi2.jpg


I've rearranged the room a bit to get the rack into a position that I can put the amp on the top (otherwise the cat may decide that it makes a good place to sit).

Sources:

Marantz CD-16 as CD Transport
Toshiba SD-330e Multi Region DVD (not shown)
PC with Terratec Aureon Sky 5.1
All of the above through M-Audio SuperDAC 2496 with serious modifications.

Denon TU-260L

Amplification:

NAD Silverline S300

Speakers:

Meadowlark Kestrel Hotrod

Misc:

Chord ProDAC digital IC
Omiga Audio Spitfire analogue IC
QED Qunex OT optical IC
Cable Talk Improved 2 IC
Tara RSC Prime Biwire Speaker Cable

Custom designed/built "Tonne Control" rack, with Seismic-sinkalike isolation. Mass: ~100kg

Trichord/Omiga Powerblock 500 Mains Isolation transformer
2x Eupen CSA 2.5 power cables (CD-16 and DAC)
Olson Mains board
 
Last edited by a moderator:
Originally posted by Lodger
re your photo - do you find you get a bit of an inbalance in the sound using that particular speaker pairing??
Click to expand...

:lol:

BTW Lodger. Noticed you have GR20s. Tony (WM) had a pair which he did quite a lot of MOd's on. Might be worth giving him a shout if you fancy a bit of DIY :)
 
I didn't remove a thing...

The marantz name is very subtly indented into the metal (yes, metal) fascia of the CD16. It's in the middle, directly above the display, in line with the open/close button.

As for phat...

The CDP was 13kg before I went silly with the dynamat. The amp is 28kg :eek: :yikes: :respect:

By the way, michaelab, you need to rename this smily in the light of present opinions on the board of the S300: :NADowner:
 
Originally posted by Isaac Sibson
By the way, michaelab, you need to rename this smily in the light of present opinions on the board of the S300: :NADowner:
Click to expand...
I know what you mean but renaming smilies is a bit of a PITA because it measn posts that have used them in the past look wrong. I guess they'll just have to keep their historical significance :)

Michael.
 

Latest posts

Back
Top