[img]http://img72.exs.cx/img72/7643/DoubleShieldedTeflonBelden83802.gif[/img] [color=darkblue] Belden 83802 Number of Conductors: 2 AWG: 12. Stranding: 7x20, Conductor Material: TC (Tinned Copper) 300Volt, 25 Amp Insulation Material: Teflon® (FEP - Fluorinated Ethylene Propylene) Outer Shield Material: Aluminium Foil-Polyester Tape (Beldfoil®) and Tinned Copper braid Outer Shield Coverage: 100% Outer Jacket Material: Teflon® (Fluorinated Ethylene Propylene) Overall Nominal Diameter: 0.303 inch (7.69mm) [img]http://img72.exs.cx/img72/7803/Belden83802atTakefiveAudio.jpg[/img] [/color][COLOR=DarkGreen][b] I have few meters of this cable surplus to requirements. You can buy this at cost price plus postage. PM me with length required and I will let you know the total cost. [/b][/COLOR][color=darkblue] DIY instructions with photos and links is at Dave's website. [URL]http://www.davewhitter.pwp.blueyonder.co.uk/tnt_tts_mains_cable_has_been_aro.htm[/URL] [img]http://img24.exs.cx/img24/910/TeflonTTScomplteview.jpg[/img] Photo by Dave Whitter that show the finished cable assembly.[/color]